Brother MFC-290C Driver and Software

By | February 22, 2018

Brother MFC-290C Driver, Software Windows 10, 8/8.1, 7, Xp and Wireless Setup – Brother MFC-290C design of is not too big with a size 390 x 375 x 180 mm and weighs 7.8 kg but the facility features that we deserve thumbs up. Here are the interesting features you need to know from Brother MFC-290C.

Brother MFC-290C Driver

Brother MFC-290C

Brother MFC-290C features Unattended Fax, Copy or Scan which allows you to directly faxing, copying, and scanning Up to 15-page by using auto document feeder with this feature will save you time. Increase Productivity with this featured feature you can increase Print speeds up to 30ppm black and 25ppm color.

No PC Required This feature will facilitate you in faxing, copying and photo printing you just need to connect your own memory on the slot that has been provided then you can do printing, faxing, scanning copying. Direct Photo Printing, features offered by Brother MFC-290C Print photos directly from your digital camera’s media cards, PictBridge-enabled camera, or USB Flash Memory.

It have fine details of your photographs. The 14.4Kbps Send and Receive Faxesbuilt-in allows black and white or color of fax can be done without a computer. 4-Cartridge Ink System this feature will make it easier for you to refill your ink just need change the cartridge that needs to be replaced.

If, copy machine usually can only copying of black and white result color another case with Brother MFC-290C. Brother MFC-290C is equipped with a color copy feature where you can get colored results when copying something. With 1200×1200 dpi resolution for black and 600×1200 dpi for color. Although the resolution of the colored results is smaller and the results remain clear.

Brother MFC-290C Wireless Setup

A. Factory Reset

  1. First, hit the menu button on your machine.
  2. Then, use the bottom up button to find network menu. And then, hit ok.
  3. After that, choose factory reset, and then hit ok.
  4. Next, select number 1 (If your printer has fax button. Otherwise, follow the instruction on the screen).
  5. Your printer is going to reset the network automatically.
  6. Then, you should do wizard setup to activate the wireless.
  7. Continue by pressing the menu button by using the bottom-up button to find “network” and ok.
  8. Choose “WLAN”. Then, press ok.
  9. Select “setup wizard”, and then wait for a moment. Your machine is searching for the SSID. Once this process is done, hit back.
  10. After completing the steps, the Wi-Fi icon will appear at the top of the screen.

B. Setting on Computer

  1. Insert the CD driver.
  2. Select the language.
  3. Next, choose the “initial installation” menu
  4. Then, select “install MFL-Pro Suite”
  5. Select yes and wait for a moment.
  6. After that, continue by choosing a wireless network connection. Then, choose next.
  7. Check all the options and choose next.
  8. If your Wi-Fi has detected the printer, choose the printer and select next until a pop-up message shows and instructs you to restart your device.
  9. On the other hands, if your Wi-Fi does not detect it, choose the second option that identifies your machine by address.
  10. Fill your IP address in your computer on the blank column.
  11. Here, you can check the IP address in your computer: choose menu > network> Wlan> TCP/IP> IP address.
  12. If you have completed the process, your computer will process it immediately until you get a message “Brother Registration”. After that, choose next and restart your computer.

C. Setting on Wireless Network Connection

  1. On your PC/ network, search for Wireless Network Connection
  2. After that, choose “SETUP” in the option. Choose the wireless network and select Connect
  3. Next, choose “Connect Anyway” and wait for a moment until you see that your wireless is connected.

Brother MFC-290C Wifi Setup Guideline

  1. You have to check that your printer is on.
  2. Go to the Network menu selection > Reset Network > Press no.1 (to restart the printer)
  3. After that, the machine will enter the Default Printer mode
  4. You have to choose Network > Setup Wizard so you can continue the process.
  5. Then, choose SSID > and then choose NEW SSID (The machine will ask you to create a username and password). After that, press OK
  6. Next, choose AD-HOC and connect it to the SSID you have created (The printer will print the printer status automatically. After that, wait for 1 to 5 minutes so the printer will connect via scan IP address)
  7. Your Wi-Fi setup installation is complete. After that, try to connect your laptop or computer to the SSID printer.

Brother MFC-290C Installation Software For Windows 

  1. To start, you must download the driver. After that, select the system operation of your computer.
  2. Next, double-click the file you have downloaded.
  3. After that, choose Unzip
  4. Open that folder
  5. Then, double-click to the D_SETUP.exe. The installation is ready to start.
  6. You are going to see the instructions on the screen. Follow the steps to finish the installation.
  7. Once the installation is complete, restart your computer. You can test your printer.

Brother MFC-290C Installation Software For Mac

  1. You must download the driver. After that, choose the operating system for your computer.
  2. Next, double-click to the “xxxxxxxx.dmg” you have downloaded.
  3. Then, double click to the “xxxxxxxx.pkg. This is the installer package.
  4. You have to follow the instructions so you can complete the installation.
  5. Once you finished the installation, please restart the computer. After that, you can test your printer.

Brother MFC-290C Driver and Software Download

System Operation Download
Brother MFC-290C Driver & Software
Windows 10, 8.1, 8, 7, Vista, XP
Download
Brother MFC-290C Driver & Software
Mac OS X 10.11, OS X 10.10, OS X 10.9, OS X 10.8, OS X 10.7
Download
Brother MFC-290C Driver & Software
MacOS (10.13), MacOS (10.12)
Download
Brother MFC-290C Driver & Software
Linux (rpm), Linux (deb)
Download
Brother MFC-290C Driver Download From Brother Official Click Here