Brother MFC-J5930DW Driver and Software

Brother MFC-J5930DW Driver, Software, Wireless Setup – The inkjet color printer Brother MFC-J5930DW comes with its main bottom line namely A3 printing capability. It is such a friendly cost printing by serving the high-yield cartridge system. With its measurement 530 mm by 398 mm by 374 mm (WDH) and 20.6 kg weight, this printer can serve you various function such printer, scanner, copier, and fax machine. Instead of its measurement, this product is easy to use and can robust to a busy environment.

Brother MFC-J5930DW Driver
Brother MFC-J5930DW

The advanced paper handling also becomes another advantage of this Brother MFC-J5930DW. the main drawer can contain up to 500 sheets and the multipurpose tray that can contain up to 100 sheets. It means you are no need to replace the paper frequently. Then, the automatic duplexer allows you to print, copy, or scan for two sides of a sheet of paper. its feature helps in reducing the paper consumption in one hand and cost printing in one hand. Then, the auto paper low detection helps you in preparing the paper sheets before the papers run out at the process of printing.

You can connect this printer with your smartphone, laptop, or desktop. By the feature of Wi-Fi Direct, you are no need a router in order to connect the printer with any devices. Then, you can also print and scan to the cloud storage service. The print resolution is up to 4800 x 1200 dpi with printing speed 35 ppm for black and 27 ppm for color. The, the resolution of copy is 600 x 600 dpi with the speed 12 cpm for mono and 9 cpm for color. While the as scanner function, its resolution is 600 x 600 dpi with the speed 14 ipm black and 14 ipm color.

In addition, as mentioned above, this Brother MFC-J5930DW has super INKvestment in which it uses 4 cartridges. They are three color tanks yellow, magenta, cyan and a black tank. This cartridges system allows you to get the lower cost of printing per page. In sort, this printer, not only serve the good quality of output, but the lower cost printing also reserved.

Brother MFC-J5930DW Wireless Setup

A. Factory Reset

  1. First, hit the menu button on your machine.
  2. Then, use the bottom up button to find network menu. And then, hit ok.
  3. After that, choose factory reset, and then hit ok.
  4. Next, select number 1 (If your printer has fax button. Otherwise, follow the instruction on the screen).
  5. Your printer is going to reset the network automatically.
  6. Then, you should do wizard setup to activate the wireless.
  7. Continue by pressing the menu button by using the bottom-up button to find “network” and ok.
  8. Choose “WLAN”. Then, press ok.
  9. Select “setup wizard”, and then wait for a moment. Your machine is searching for the SSID. Once this process is done, hit back.
  10. After completing the steps, the Wi-Fi icon will appear at the top of the screen.

B. Setting on Computer

  1. Insert the CD driver.
  2. Select the language.
  3. Next, choose the “initial installation” menu
  4. Then, select “install MFL-Pro Suite”
  5. Select yes and wait for a moment.
  6. After that, continue by choosing a wireless network connection. Then, choose next.
  7. Check all the options and choose next.
  8. If your Wi-Fi has detected the printer, choose the printer and select next until a pop-up message shows and instructs you to restart your device.
  9. On the other hands, if your Wi-Fi does not detect it, choose the second option that identifies your machine by address.
  10. Fill your IP address in your computer on the blank column.
  11. Here, you can check the IP address in your computer: choose menu > network> Wlan> TCP/IP> IP address.
  12. If you have completed the process, your computer will process it immediately until you get a message “Brother Registration”. After that, choose next and restart your computer.

C. Setting on Wireless Network Connection

  1. On your PC/ network, search for Wireless Network Connection
  2. After that, choose “SETUP” in the option. Choose the wireless network and select Connect
  3. Next, choose “Connect Anyway” and wait for a moment until you see that your wireless is connected.

Brother MFC-J5930DW Wifi Setup Guideline

  1. You have to check that your printer is on.
  2. Go to the Network menu selection > Reset Network > Press no.1 (to restart the printer)
  3. After that, the machine will enter the Default Printer mode
  4. You have to choose Network > Setup Wizard so you can continue the process.
  5. Then, choose SSID > and then choose NEW SSID (The machine will ask you to create a username and password). After that, press OK
  6. Next, choose AD-HOC and connect it to the SSID you have created (The printer will print the printer status automatically. After that, wait for 1 to 5 minutes so the printer will connect via scan IP address)
  7. Your Wi-Fi setup installation is complete. After that, try to connect your laptop or computer to the SSID printer.

Brother MFC-J5930DW Installation Software For Windows 

  1. To start, you must download the driver. After that, select the system operation of your computer.
  2. Next, double-click the file you have downloaded.
  3. After that, choose Unzip
  4. Open that folder
  5. Then, double-click to the D_SETUP.exe. The installation is ready to start.
  6. You are going to see the instructions on the screen. Follow the steps to finish the installation.
  7. Once the installation is complete, restart your computer. You can test your printer.

Brother MFC-J5930DW Installation Software For Mac

  1. You must download the driver. After that, choose the operating system for your computer.
  2. Next, double-click to the “xxxxxxxx.dmg” you have downloaded.
  3. Then, double click to the “xxxxxxxx.pkg. This is the installer package.
  4. You have to follow the instructions so you can complete the installation.
  5. Once you finished the installation, please restart the computer. After that, you can test your printer.

Brother MFC-J5930DW Driver and Software Download

System Operation Download
Brother MFC-J5930DW Driver & Software
Windows 10, 8.1, 8, 7, Vista, XP
Brother MFC-J5930DW Driver & Software
Mac OS X 10.11, OS X 10.10, OS X 10.9, OS X 10.8, OS X 10.7
Brother MFC-J5930DW Driver & Software
macOS (10.12), OS X (10.11), OS X (10.10), OS X (10.9)
Brother MFC-J5930DW Driver & Software
Linux (rpm), Linux (Deb)
Brother MFC-J5930DW iPrint&Scan Download
Brother MFC-J5930DW Driver Download From Brother Official Click Here